JH series drive
Diversified mode control
★ position / speed / torque control ★ multiple sets of electronic gear ratios
★ mixed mode switching control ★ external inching function
★ speed / torque limit function ★ digital input / output flexible planning
★ multi mode origin regression ★ internal multi-stage control
Excellent performance
The setting time is less than 1ms, and the speed response bandwidth is 450hz
It has good low-speed operation characteristics. Under the command of 1rpm, the actual change error of the speed of one revolution
Only 0.5% no-load acceleration time from -3000rpm to 3000rpm is 10ms
Communication function
Built in rs-232/485/422 interface
Use communication to set operation target and speed
Using rs-485/422 for multi axis communication control
Safety precautions:
1. Check whether the power supply and wiring of l1/l2/l3 are correct.
2. Confirm whether the phase sequence of servo motor output uv/w terminal is correct.
3. When using the external reconstituted circuit, please disconnect the P and D ends, and the external reconstituted resistance should be connected to the P and C ends; If the built-in reconstituted resistor is used, short circuit the P and D terminals and disconnect the P and C terminals.
中文
